Nail correction sequence. Nail Correction Gel: Step-by-step instructions

Nail correction is an important manicure stage. Over time, the plane extended or stained with the shellac is growing, because of which any drawing is distorted and becomes inaccier. To fix it at all, it is necessary to completely remove the gel or acrylic, just can be corrected form or pattern.

Types of scorched nail correction

Everything correction types are classified by the complexity of work.:

• Small. Least time-consuming. Includes a small editing of the drawing or cutting cracks. It is also required if the nail was slightly damaged by the mechanical way (his edge was bears or a little lacquer);
• Average. This re-extension of the artificial plate is on top of natural. It is natural after any manicure. Includes painting and processing of "fresh" edge;
• When the nail breakdown, a complex correction is made. If the model broke the plate or erased the lacquer, the master re-repeats the manicure procedure on one or more fingers. The same type of work is used in the deformation of the coating.

If the correction of the abnormal nails is a natural process, then the correction of broken or cracked plates is a forced measure. To avoid this, it is enough just to carefully treat them, try to minimize the impact of household chemicals and not to check them for strength.

Step-by-step instructions for nail correction gel

The correction of gel nails at home includes:

1. Removal of old material;
2. Shaping;
3. Removal of grinding cuticle;
4. Manicure gel lacquer.

Consider each stage more. To remove old gel varnish It is convenient to work with a mill. Of course, you can use special solvents or spool biogel with a filling, but this is atavism.

The milling machine is a special machine that is used during manicure, extension and nail correction. Includes nozzles for cutting, polishing, smoothing inhomogeneous plates. The cutters allow minimally injury to the plate and remove the old varnish much faster.

After that, the pail or the same, nails apply the desired form. It is important not to leave too thin edges, otherwise they will easily break even during everyday work. For beginners, it is best to limit the classic semicircle.

Now nails are soaked in the bath for softening Cuticula. Skin itself is moved from the plate into the hollow, where it is cut with nipples or scissors. You can also buy a softener of the Cuticle, which will allow you to remove it without cutting tools.

Step by step instructions for nail correction Shellac at home (plus photos):

It is important to note that the technique of working with single-phase gel is almost identical, except for speed. Such a design and nail correction can be done at times faster than the usual shellac. Therefore, it is called - express technology.

Correction of acrylic nails

Before making the correction of scorched nail acrylic, it is important to prepare everything instruments:

• Large-grain file (wide, optimally - 100x100);
• Caps for the monomer (a means for avoiding recalculation is recruited);
• Powder;
• Degreaser, primer;
• Acrylic;
• Tassels and pipette.

As a degreaser, you can use the usual alcohol or any tonic on an alcohol basis - they possess the same functions. Also before the correction, the old varnish is removed, and the marigold is slightly squeezed.

Step-by-step instructions for beginners with video, how nail correction is performed by acrylic:

Video: Correction of gel nails (nail design lessons)

Many modern ideas of the correction of acrylic nails include the use of gel varnish. Externally looks very natural (if the correct length and form is selected).

Laser correction of an ingrown nail

A separate topic for many girls is the correction of eloquent nails with a laser apparatus. This technique appeared relatively recently, but quickly became the most effective in solving this problem.

Ingrown nail - an unpleasant and dangerous phenomenon. For example, if he is inserted on his leg, it may cause a distortion of gait or injuries. For some time, a pedicure can save from him, but on the leg, but often there is enough effect less than 2 weeks.

As stages, the nail laser correction on the leg is held:

1. Technology includes exclusively medical intervention. Do not wait for you to make a pedicure or will be written to the plate - they are engaged in beauty salons. First, you will need to fill out some papers and choose a suitable painkiller, after together with your doctor, decide on the type and force of the laser beam;
2. The anesthesia can be carried out using lidocaine subcutaneously or using special creams (ointments);
3. The first removes the skin roller. It is he who is the main cause of the wrong growth of the plate. The doctor simply burns out a carbon laser;
4. Under the roller almost always there is a process that is the main cause of rustling. It is corrected with the help of a tweezers and propheted with marlevary turund for fixation;
5. Within a few days, a processed area will require special care. If summer on the street is important to avoid dust and dirt, as well as eliminate bathing in open reservoirs, if winter or autumn - it is recommended to wear spacious shoes.

The average price of laser correction is 10 dollars per session. To find out how much the procedure is worth - you need to consult with your doctor personally, to demonstrate the scope of work and choose the optimal treatment option.

Modern women in pursuit of beauty and practicality often wear plates can be pasted and wicked. In the latter case, the handles look more natural and gently. However, such beauty always requires timely processing. Presented to your attention to become talking about how to make the correction of gel nails.

When to carry out manipulation?

The period of time through which the correction of gel nails is carried out depends on many factors: lengths, accuracy of wearing, the prescription of the first extension. After the first coating of the plates, a strong material must be treated after 2-3 weeks. Subsequently, it is permissible to wait 4-5 weeks. But remember that plays the role and growth rate of the natural plate.

Gel nail correction lasts about two hours. Therefore, you need to schedule time in advance. If you make a new coating yourself, then leave it can from three to five hours. Consider this so that there are no unforeseen situations.

Necessary materials

Proper correction of gel nails assumes the presence of all tools. You will need:

• pecks of different rigidity, grinding bar (bagnik);
• degreaser or liquid for removing varnish (without acetone);
• primer;
• gels of different phases;
• stickers stencils (with a change in the wave length);
• lamp for drying gel.

Some masters work machine. Such devices allow you to quickly cut the old gel layer. But this is optional. The machine only shortens the time of the procedure, but does not affect its quality and result. Correction of gel nails is stepdown. Next, you can familiarize yourself with the main points that are performed in the specified order and in any way otherwise.

Removing the old layer and processing of the working area

How to make gel nail correction? Before you begin to apply a new layer, you need to remove the old one. To do this, with the help of a lacquer remover, clean the surface of the plate. If the coating was previously made, it needs to be cut or clean with a special solvent.

Spire with hard grinding old layer. It is important not to overdo it. There is no need to clean the gel to the natural plate. Just strip it with the level of the abnormal area. If there are chips or detachants on the nails, then these places need to drink well. Do not leave air under the gel. This will lead to the rapid destruction of the material. Purify the desired form. At this stage it will be the main one. It is according to the created collar plate that you will form a new marigold.

With the help of a brush, remove dust from your fingers. Nails thoroughly wipe the degreaser. It is important that the napkin does not leave the villion on the rough surface.

Application gel

If the correction of gel nails is performed at home, then to simplify the procedure, it is permissible to use single-phase material. The masters in the salons prefer to use three-phase gels: basic, main (modeling) and finishing. If you wish, they can be purchased independently. Plus single-phase coating in the fact that it does not provide additional costs. Such a gel is quite liquid and malleable.

Before lays out the foundation, it is necessary to cover the nails in prime. This fastening fluid acts as a soil. Pay special attention to the "naked" segment. After the primer is missing, you can not touch the nigs to the subjects and wipe the plate. If you still did it, then once again degrease the surface and apply a primer.

The gel is laid out in three layers. If you have single-phase material, then only it is used. In the case of the interior operation, the base is first applied.

• The first layer should be very thin. Gel seems to be rubbed into the nail surface. Next, the marigold is placed in a lamp for 2-5 minutes (depending on the power of the device).
• The second layer is performed by the main (sculpturing) gel. Nails are covered with sufficient material. With this layer, you form a marigold. Fill in all dug plots. If necessary, add more material from the tip. Be sure to dry this layer in the lamp for 10-12 minutes. After that, it is necessary to give the plate the desired form.

Opol and grinding: give the shape and apply the finish coating

With hard pylon, create marigolds. Length and shape on each finger should be the same. When you achieve the desired result, you need to shake dust. Re-process your nail degreases and dry.

Next, the finishing layer is applied. Repeat that when using single-phase gel, all work is performed only by them. The final coating should not be so thin as the base. But this layer must be significantly less than average. Find the golden middle. Try to cover the plate. Seeing the gel in the lamp for another 5-15 minutes. It is important that all layers are well dried and durable.

After that, with the help of BAFI, pass the finished marigolds. Do not spill a lot: you need to achieve the smoothness of the plate. If necessary, the pilot is once again in shape.

Decorative coating

Each correction of gel nails provides a final decorative coating. It can be made by ordinary varnish or gel substances. This part of the work depends entirely on your imagination and desires.

Often women put design under gel. In this case, the figures are performed after the formation of the second layer. Finishing coverage provides for securing work. It protects the created beauty. Please note that simple varnishes are kept relatively shortly even on gel nails. Therefore, for the practicality and durability of the wizard, the coatings that require the same drying in the lamp as gel are increasingly used.

Increase length

If the nail correction requires the lengthening of the plate, then you will have to pre-remove the available layer. Manipulation is performed using a saw or typewriter. Please note that such a procedure is not very favorably reflected in the state of the natural plate: nails are thinned, begin to crumble and lose most of the surface layer.

In the case when the elongation is inevitable, it is necessary to neatly cut the gel. After that, glue the stencils for which the length is adjusted. Cover the native plate with a base layer. After drying, lay out a sculpturing gel by making a preliminary form. Laying the average layer with a new buildup is needed from one to three times. Much depends on the quality of the material, the desired shape and nails of a woman. The manipulation of the same way as the usual correction is completed.

Summarize

Make the correction of gel nails at home is not as difficult as it seems. It is important to stock the necessary materials, time and patience. Perhaps the first time you will succeed exactly what is planned. But over time you will learn how to quickly and correctly process the marigold. By making the correction yourself, you can safely save.

If you do not want to suffer and prefer first-class work, then visit the salon. The average cost of correction of gel nails is from 1000 to 3000 rubles. Do not forget for the beauty of the hands regularly do a manicure. Be beautiful!

Short nails are not for you? It is planned an important event on which you need to shine, but your manicure leaves much to be desired? Let's talk about how to give the nails the fedleled shape and attract attention to your wonderful notes as long as you want.

Correction of nail gel is the second life of artificial nails, to which you have already accustomed. In order to preserve their beauty, this procedure should be carried out systematically.

This is especially true of those ladies who do not think of themselves without such a hot trend, like impeccable nails, and strive to always be at the height.

If you wish you yourself in the shortest possible time to learn this skill or just understand how qualitatively, one or another master will be able to spend this operation, a step-by-step instruction will help you. You will also learn how to correctly update the coating and restore the appearance.

The video presented on the Internet will help you figure out what is included in the qualitative correction procedure.

Does your master spend correctly correctly?

The correction of gel nails is necessary in order to strengthen, as well as ensure the full protection of its own nail plates, while unhetric nails must acquire a luxurious and captivating appearance for a long time.

This procedure today enters the basic service package in many salons, and often here you can take lessons to learn this skill yourself.

The main secret of the skill of specialists in gel correction is that the adjustment should not be reflected on the quality of the initial modeling of the nails.

There are several correction techniques:

• complex and simple correction by gel;
• mini-correction;
• correction of gel nails with a french gel;
• correction implies the reconstruction of the nail design;
• Correction of gel varnish.

Such a procedure is incredibly time-consuming, so during it the masters should be accuracy. Any error may affect not only appearance, but also at the time of "operation" of your nails. How to properly give the procedure, prompt video lessons that you will find below in our article.

Approximately 2-3 weeks, the manicure begins to shift to the tip of the nail. If you answer something and you will challenge such a procedure as the correction of scorched nails, then over time, the errors will be noticeable, which the master allowed the initial modeling.

Reverence of nails is fraught with a breakdown, as well as the occurrence of cracks on them. The aesthetic appearance, which, of course, we would like to preserve a little more, also plays a role.

That is why the correction of scroll nails should so often, as it recommends doing your master.

How to show videos typically, the optimal frequency is considered to be 1 time in 3 weeks.

Perhaps video lessons, abundant on the Internet, will help you not only know the basics of performing this procedure to choose a good master, but will give an incentive to learn this skill and make correction yourself?

Aza gel correction

As you can see after viewing the photo and video, the process itself is carried out in several stages. The instruction prescribes to make them in the following sequence:

1. At the first stage, as instructions and lessons on manicure skills tell us, it is necessary to carry out special skin processing.
2. Now you need to shorten the marigolds, and then give the form (trimming).
3. The thickness of a natural nail should be slightly reduced by a manicure stick, and then eliminate the cuticle.
4. The next thing you need to do is to form a stressful area formed in the middle of the note. To do this, the material should be distributed over the surface as soon as possible, and then dry and polish.
5. At the final stage should be lacquered. (This is if another Nail Art was not fulfilled initially.)

Now the result will hold over for a long time, but a month later, it will be necessary to reconcile again to "refresh" a manicure.

Preparation for the procedure - what will required you?

1. When carrying out gel correction of nails, there are a number of rules that you need to follow the campaign to the salon.
2. About a couple of hours before a specialist visits, it is not recommended to apply cream to the hands, as well as wash them.
3. For 3-4 days before this event, an ordinary hygienic manicure should be performed, but without using varnish. We will optionally find out the specialist and the duration of the session. This parameter depends on the state of the hands.
4. You can also perform bathtubs from healing herbs to avoid aggressive impact of chemicals.

Special preparation will give the opportunity to carry out the procedure most qualitatively, and the result will continue for a long time.

How to help your nails move "Fate blows"

• Rocked nails require high attention and accuracy. But it does not always turn out to handle them carefully. Strong, rhythmic punch, pressing - all these are reasons for correction.
• An artificial masterpiece can burst, crack and break. In the photo and video, it can be seen that aesthetic look spits quickly and is lost by the past charm.
• In the event that gel coating was damaged, make the adjustment will not be difficult. But it happens so that the nail cracks together with natural, and then the session may take more time. In such difficult cases, you will also help the lessons for gel correction.
• On the site of the side sinuses of the nail may appear. Domestic work can affect it, and allergic to the ingredients of the gel, as well as the frequent reception of antibiotics.
• If you have reanimated the novel correction, now they should be preserved as much as possible. Do not knock them, as well as scratch the surface and open it difficult to the lids, boxes, etc.
• If you are faced with the task of putting order in the apartment, then the projects should be performed only in gloves, and after them, take the rule to lubricate your hands with cream.
• Do not be afraid to use moisturizing means, because the gel allows them to use them in any quantity.

For many women today are relevant problems such as fragility and poor nail growth. Also often defects due to mechanical injuries and damage. In the beauty salon, the manicure wizard decide this problem with the help of such a procedure as gel nail extension.

Optimal solution of many nails problems

With the help of the gel, you can strengthen the nail, hide all sorts of defects, create the desired length and shape, decorate a variety of drawings and much more. After polymerization, the gel has a sufficiently plastic structure, which allows you to create artificial nails, as similar to natural. However, due to the fact that the nail is constantly growing, the material is also shifted. To return the nails of the original beautiful view, it is necessary to regularly correct the correction.

Such a procedure as the correction of the nail-based gel, in the beauty salon is one of the most sought-after services. Usually after 3-4 weeks, the nails grow into several millimeters, the architecture of an artificial nail is disturbed, the highest point is shifted - apex. All this promotes fragility. It is also possible to detach the material.

Types of correction

There are several types of correction:

• easy and complex nail correction gel;
• mini-correction;
• nail correction by french gel;
• correction with design restoration;
• nail correction with gel varnish.

It's important to know

Before you start any correction, the master should pay attention to the general state of nails and health of the clients, which disturbances and breakdowns occurred, in which the material was detached. Sometimes the reason for the detachment of artificial nails can be temporary reception of antibiotics, violation of the hormonal background, excessive sweating of the hands, ignorance of rules for the operation of artificial nails. By excluding all the causes of a non-technical nature, the master selects the necessary material.

Materials and equipment

For gel correction, the following consumables and equipment are needed:

1. Gel. The wizard selects a 3 or 1-phase system. It will take the base gel, a transparent gel to create a substrate, camouflage gel, a white gel for Franch.

2. Degreaser.

3. Prime. Acid or without acid content. Designed to create a good gel grip with a natural nail plate.

4. Gel finish coating. It is intended to create a protective layer and giving the brilliance of finished nails.

5. Liquid to remove the dispersed (sticky) layer on the surface of the gel coating.

6. Paper forms.

8. UV-lamp with a power of at least 36 W.

9. Mill or a set of pylons of different abrasiveness (from 100 to 240 grit).

Each correction is characterized by the complexity of execution, the amount of expendable material spent and time. Simple nail correction gel is most common. Technically, it is basic.

Simple correction is always planned in advance and is carried out after 3-4 weeks. In its process, the material is laid out only in the zone of the abnormal nail and side rollers. The instruction below will tell how to make the nail correction gel in 1 hour. The procedure is simple, but requires patience.

Step-by-step nail correction gel

Step 1: The hands of the master and customer are treated with a disinfectant solution.

Step 2: If necessary, the European manicure procedure is performed.

Step 3: At the request of the client, the length of the nail is shortened, the desired form of the free edge is given.

Step 4: These places are processed using a mill or a pink, where the material was peeled. Also equal to the entire surface of the nail. The highest point is spilled, since symmetry is broken. With a thrust nail, gloss is removed using a softer pink of 240 grit abrasiveness. It is necessary to work with the saws very carefully so as not to repel and not injure natural nail. After it was made, all dust is well removed using the brush.

Step 5: The nail plate is degreasing. The contraction of the nail is processed by primer. It is applied a very thin layer. Too large amounts can be one of the reasons for detachable material.

Step 6: If the wizard uses a 3-phase gel system in operation, it inflicts the base layer of the gel on the entire surface of the nail. This layer is polymerized in the UV lamp for 2 minutes. Sometimes during the polymerization of the gel, the client may experience unpleasant sensations and burning in the surface of the nail plate. In this case, it is recommended to remove the hand from the lamp for a few seconds and put it again as soon as the reaction stops.

Step 7: Without removing the dispersed layer, a small amount of gel is applied to the abnormal part of the nail and evenly distribute. It is impossible to contact the gel with a cuticle or a clipping on the skin of the client's hands. The distance from the gel to the cuticle should be about ½ millimeters. This layer is also polymerized in the UV lamp for 2 minutes.

Step 8: The nail architecture is restored by the second gel layer and the highest point is apex. This layer is polymerized in the UV lamp for 2 minutes.

Step 9: After the new nail is created, it is reduced to align the surface of the gel and give the nail final form. The cuticle's zone is very neatly spilled.

Step 10: The entire surface of the nail is covered with the finish gel and is polymerized in the UV lamp for 1-3 minutes. If a gel is used with a disperse layer, then after polymerization it is removed by a special fluid.

After new nails are ready, you can offer the client to cover them with decorative varnish or decorate the pattern. In the end of the cuticle rubs the nutrient oil.

Complex correction

The complex nail correction with gel is carried out in cases if time from extension and before the correction was more than 4 weeks. As a rule, at this time, there is definitely breakdowns, and the material has moved to the middle of a natural nail. Such correction is already practically corresponding to the full nail extension. In the process of complex correction, the master spills the entire material to the substrate. Then gel completely creates a new nail, taking into account all proportions.

During complex correction, aquarium design or French manicure is often performed or restored. It is important to adjust the reverse side of the nail. Be sure to be pumped up with a milling of a milling irregularity or detachment, a new arch is created.

Correction of French manicure gel

It should be noted that the correction of the French manicure directly differs somewhat from the usual correction. You can restore French by the method of complex correction and spill, and you can use the removal method of free edge. In this case, the free edge is completely spilled by a mill or saw. He is given the right and symmetric form of a smile. I washed the surface of the nail and the general preparation is carried out according to the same steps as with a simple correction. Then under natural nail is put on a special paper form. It will serve as a working surface to create a new free edge. White gel is laid out an online edge. After its polymerization, the nail is compiled in accordance with the rules, the desired form and the length of the free edge is given. At the end, the French manicure is covered with finishing coating.

Typically, the time of the complex correction or Franch is 1.5-2 hours depending on the selected design.

Mini-correction

The fastest nail correction gel is a mini. It takes no more than 15 minutes. It is performed after 5-6 days after nail extension. If the expiration of this time appeared small detachment of the material, they neatly washed with a sawmill for natural nails. The entire surface is covered with a fixer or finishing coating.

Correction with gel varnish

If the client is already tired of scorched nails, but does not want to completely cut them, then you can offer to correct nail polish nail correction. This is a great way to gradually remove artificial material. In this case, the nail is processed in accordance with the manual for simple correction. During the injection, the boundary of the artificial material is compared with the surface of a natural nail, without the formation of the apex. The right shape and length gives the nail.

After the primer washed and pre-processing, the entire surface of the nail is covered with a thin layer of base gel lacquer. Next, 2 layers of gel varnish and finishing covered are applied according to the technology. The coating of the gel varnish of the correction is not subject to. After 3 weeks, all the material will be simply removed. If the client wishes to grow nails again, the wizard will fulfill the full nail extension gel. Correction will continue to be held every 3-4 weeks.

Nail

As far as there is a professional master who caused the gel varnish to the nails, the client is very soon to visit him. There may be several reasons for one, we will highlight the most basic:

1. Nailing. Ideally, the correction of gel nails is done every 3-4 weeks. Of course, the procedure can be postponed for a long time, because the drawing is beautiful or time. But if you should be honest, every day such handles are becoming less beautiful. A unprocessed nail plate is seen, which first time girls can try to cover the applying of ordinary varnish. In addition, the longer the nail, the more chances of becoming a victim of chips or cracks.
2. Physical pressure or blows. Gradually, girls get used to the new state of their nails and stop cautiously with them. Sometimes it happens that the hand hits the hard object or even worse - the client can pinch the finger of the door. In any of the similar cases, the appearance of the marigolds will deteriorate and the correction of gel nails is needed.
3. Cracks. Inappropriate quality applied gel of varnish or improper application sometimes lead to the appearance of small or large cracks. Correction can also be corrected, which is complicated only if it cracked and own nail.
4. The coating is peeling. Causes may be the same as when cracking, but if it happened not for the first time, it is worth understanding the problem. Expanding in the form of lifting the coating on the sides and can reach one or a half millimeters.

Sometimes the problem of peeling occurs after the nail processing with a strained pail, which does not fulfill its function fully.

Types of correction

Based on the reasons for the forced representatives of the beautiful sex, again and again visit the manicure masters, allocate 3 main types of gel nail correction:

• mini-correction - most often it has to be done in the first week after applying gel coating. The reason for this may be small cracks, chips or scratches that need to be removed and to re-impose gel lacas in their place;
• simple or medium - it can be the usual planned correction of gel nails, consisting in the feeding and coating with a lacquer of the eminent part of the nail plate;
• complex or large - the execution of such a correction is possible at any time, the reason may be a serious damage to the coating (chips, large cracks, peeling, and the nail breakdown).

The latest form also applies to the correction of gel nails, a more detailed description of the technique of execution of which is below.

Procedure

Let's move on to step-by-step instructions on how to make the correction of gel nails at home.

Preparation of necessary materials

Any master who is going to make correction must be available special tools:

• the antiseptic needed to disinfect the skin around the nails and delivering from possible problems with fungus;
• himself gel varnish;
• primer that is intended for a better effect of gluing the nail plate and gel;
• the finish coating is applied at the end of the procedure and makes nails shiny;
• means that takes off the sticky layer after drying the nail in the UV lamp.

In addition to those already listed, it is also worth noting decorative elements - rhinestones, glitter, ribbons, and so on. They are not mandatory in the correction process, but may be needed in the case when the drawing on the nails want to change.

Preparation of equipment

The most important equipment during the correction of gel nails is an ultraviolet lamp. It is used for polymerization of lacquer gel, i.e. Accelerate its solidification. In addition to the lamp, the manicure master will definitely use nail files with which it will grind the nail plate and give her shape.

If the hardware correction of gel nails is performed, a special mill will be needed. Depending on the expected result, various nozzles are used for it, which can be obtained in more detail from the table.

Nail preparation

The correction of gel nails begins with the preparation of the corrected surface:

• to start, the hands are processed by an antiseptic agent;
• then it moves the cuticle to stir the resulting part of the matcher for natural nails;
• next requires a sawmaker for extensive nails, which is treated with a gel coating. At the same time, the border between the real and artificial parts of the nail is made as less noticeable as possible, and the existing detachments are removed;
• the last step at this stage is the formation of the free edge of the nail.

Coating gel varnish

After the fingers were prepared properly, the master removes all the dust from them after spillings. A rigid brush is used in this process. Now, in order to start applying the gel coating, the specialist degreases the surface and causes the primer to the abnormal part. As soon as it dries, the gel is applied, and the hand goes under the light of the UV lamp on half a minute. At the end of time, it is not necessary to remove the sticky layer, and the nails are covered with simulating gel. Before that, if necessary, design is made. Next, the handles are replaced again in the lamp, already for 3 minutes.

Modeling gel can be applied another time, the free edge of the nail is sealing and again in the lamp. This time the time is also 3 minutes.

Nail processing

After repeated polymerization, it is necessary to remove the sticky layer, for which there are perfectly suitable suite napkins. The next step is to give the nail final form, and all the dust is cleaned with a brush again. At this stage, it is also necessary to carry out disinfection, after which you can use the finishing gel to fix the result. After that, polymerization is also necessary - 1 minute.

If the gel varnish still got on the skin of the finger, an orange stick will come to the aid, which will help to get rid of it gently. At the end of the procedure for the correction of gel nails, the wizard again removes the sticky layer and necessarily puts the moisturizing oil on the cuticle, which gently rubs into the skin.

Video

The video shows how to make gel nail correction yourself. This procedure can be carried out at home, if the nails are ordinary.

How to make the correction of gel nails, if the design of French is applied? This can be done both manually and hardware method. In any case, this procedure is the most time consuming and, as a result, the most expensive. It is connected with the need to keep a smile, especially if natural nail is shouted under the gel.

The correction of gel nails Frenc is done in this order:

• A disinfectant is used.
• All defective sections of the gel coating are removed, then dust is removed with a brush.
• Nails are degreased and placed by primer.
• With the help of a transparent modeling gel, the edge of the nail is raised, which after that it is necessary to dry in the UV lamp and remove the sticky layer.
• The camouflage gel is formed by the nail region, which are polymerized again (2 minutes).
• Stress zones are crimped, pinned with a clothespin, and the knobs again go dry (1 minute).
• After the sticky layer is removed, the edges and the surface of the nails are processed. Again the dust is cleaned with a brush.
• This step is the most important thing - a white gel is formed a smile, after which polymerization is needed for a duration of 4 minutes.
• Now the nails are given the final form, after which the unnecessary dust is removed, and the surface is degreased and is again covered with a primer.
• The fixing agent (from the external and inner side) is applied and two-minute polymerization is carried out.

Nail care after correction

At least the first time after the nail correction requires a careful relationship. Therefore, girls are advised, if possible, do not use nails for opening, scratching or knocking. Any housewife activities associated with water and various means is possible only if gloves are used. After all the cases are redone, and the gloves are removed, it is advisable to moisten your hands to your favorite cream.